I've been looking and looking for a dog gate that I can use for my stairs that will keep a tiny little 3 lb monster from going up the steps.
The one I have now works for the other two but little man Hudson slips right thru the bars. The bottom half of the stairs has spindles, so mounting a gate will be tricky.
Now that the DD has moved back home and living upstairs, they try to get to her. I don't allow the dogs upstairs where there is carpeting.
When we first got Cleo (she's a 3 year old mini dox) we had to find a way to contain her to the yard. We have wrought iron fence and she was escaping between the rungs. I got some green chicken wire and wired it to the fence, up about 12". It was dark green so it blended to the grass so it looked nice enough for the neighborhood. Sure stopped the escape artist.
Is there a way to artfully place a wire over the gate you currently have to make a fix for Hudson?
Froggie you can make it work. Get creative! Take a pretty ribbon that has metal threaded inside. Or fake flowers. Or something. Take a picture so we can see it.
Fab....may YOU can get creative, I don't have that gene. I will take a picture and have someone post it (cause I'm a dummy). Maybe if we put our heads together we can come up with something.
I hope it sent, I sent it from my ipad. I was going to see if I could remember how to post from my laptop but gmail won't open now. I will keep trying.
Ok I saw it. You need fake flowers, ribbon, or anything with metal wire inside it to be able to twist it on there. It will decorate it and also keep H out.
We bought one of the baby gates from Walmart that has wood on the frame and a plastic lattice inside the frame. It worked fine, but it really isn't a gate. You have to take it off to get in and out or step over it.
Thanks Alaska but since my DD is back home I don't want her to have to step over it, I'm afraid that when she comes home from work at night, she might trip and fall down the stairs.
I'm still looking and considering trying to modify the one we have. I'll go to Hobby Lobby when the weather is a little better and see what I can find.
MY husband bought ours at Tractor Supply, in the center is a gate that opens so a person can step through itwithout taking the gate off or stepping over it. You don't need any hardware it adjusts to fit most openings. Then we used the heavy duty plastic ties you slip through the opening on the other end of the ties & you can place them anywhere on the gate. Them ties are great, the thingy in the dishwasher that holds your eating utensils, the bottom broke out of mine & we used them to fix it. Well Good Luck finding what you need!
There were other options, but this seemed the simplest.
It would be really lightweight, so if your other dogs are bigger, they may be able to lift it with their noses. You could make it taller so it hits the top of the banister and just slide it open and closed.
Fab, that's true, but if I could make this, it might work and I could eliminate the one at the top of the stairs. The other two don't try to get around...under...or through the gate, they are content at the bottom of the stairs.
I don't think I would have to make it very tall since the other two aren't jumpers. It would be easy for DD to slide open and closed and not have to step over it.
I'm really liking this one...now how to make it...I'm NOT crafty, not crafty at all!
All you need is to take measurements to find the length and height you want. Get PVC cut to those measurements at the hardware store. They sell little angled joints specifically for PVC. The PVC will pop right in the joints, creating your frame. The frame will take like 5 minutes to assemble.
The fabric would be easy, just a bit more time.
Would a king-sized pillow case sized gate work? If so, I'd just use that, and sew the open end closed after slipping the pillow case over the frame. You could even bring the pillow case to the hardware store to make sure the PVC cutting fits perfectly.
If you want it bigger than that, just take two pieces of fabric on top of each other, with the pattern showing on both outer sides, sew up three of the sides, flip it back, then put it on the frame and sew up the 4th side.